What are the uses of waveform washers?2022-08-12

There are two types of corrugated washers: one is flat wire, and the other is circular wire. Flat wire coils are commonly used, with circular wires having a force value three times greater than flat wires of the same specification.

Current national standards related to retaining rings2022-08-12

GB/T20057-2006 Rolling bearings - Single row cylindrical roller bearings - Chamferdimensions for loose rib and non rib sides - Rolling bearings - Single row cylindrical roller bearings - Implementation on August 1st, 2006

What is a spiral retaining ring2022-07-22

Spiral retaining ring, also known as spiral elastic retaining ring, is made of flat metal wire and is heat treated and surface treated to have good elasticity and toughness. Used for split shaft and hole, divided into single circle, double circle, an…

Function and Specification Selection of Retaining Ring2022-07-22

Retaining rings are widely used in mobile hydraulic equipment, telescopic cylinders, and industrial hydraulic systems. The retaining ring mainly serves as an axial fixation to prevent the occurrence of 'extrusion' of the O-ring, with the co…

What is the difference between a corrugated washer and a regular washer?2022-01-03

Wave washer is a type of spring washer, which is different from flat washer, so we should pay attention to distinguishing between wave washer and flat washer in use. Otherwise, it may cause us unnecessary trouble during use.

Selection of waveform washer materials2021-01-12

In threaded fasteners, washers are used to reduce the compressive stress on the bearing surface and protect the surface of the connected parts, as the supporting surfaces of bolts, screws, and nuts cannot be made very large (due to material and proce…

What is the function of waveform washers2019-11-14

The types of waveform washers are divided into disc washers, single wave washers, elastic retaining rings for holes, elastic retaining rings for shafts, and E-shaped retaining rings. The simple detection device for elastic index of waveform washers c…

Surface treatment of corrugated washers2019-10-26

The surface of the waveform washer requires oxidation and blackening treatment, and the surface is free from defects such as breakage, oxidation and rust. The waveform is evenly distributed. The materials include stainless steel and carbon steel, and…

Introduction to the classification and function of retaining rings2019-10-26

The retaining ring forms a side wall on both sides of the Timing belt wheel. For the convenience of replacing the belt, the retaining ring on one side is of a detachable type. The waveform retaining ring is easy to meet on-site maintenance requiremen…

Basic Introduction to Retaining Rings for Holes2019-10-24

Basic introduction of hole retaining rings: Hole retaining rings can also be called hole elastic retaining rings, hole retaining clips, hole retaining rings, hole retaining springs, and hole retaining rings. Installed in a circular hole for axial mov…

Introduction to the classification and function of retaining rings2019-07-26

The retaining ring, also known as the circlip, is divided into a hole retaining ring and a shaft retaining ring. It plays an axial limiting role and can prevent other parts from moving axially. The forming process often uses sheet metal punching and …

What is the hoop effect2019-03-28

What is the hoop effect