Application and Repair of Retaining Rings on Motorcycles

location:Home / NEWS / Application and Repair of Retaining Rings on Motorcycles

Application and Repair of Retaining Rings on Motorcycles

date:[2018-03-05]     pk_hits:
近年來,摩托車整體鋁輪替代傳統輻條式車輪已趨普遍,有相當一部分后鋁輪采用圓形襯套(緩;中套)用彈性擋圈卡住傳動大鏈輪。
在路況較差的農村地區使用,一般在一年多時間,有的甚至只有幾個月,就會出現行駛中大鏈輪突然滑落,這是因為;中擊震動力太大引發襯套損壞,造成彈性擋圈無法卡住,就因這個擋圈槽的磨損就要更換整個后鋁輪,實在是不合算。
擋圈
找到一個非常合適的方法供大家參考,擋圈具體操作方法:把整體后鋁輪卸下平放地上,先檢查4個襯套,如有松動就換新的。把傳動大鏈輪安裝好,用一張稍硬的紙板平放在圓圈上面,按壓出一個擋圈印,依照印出的圓形剪下,再剪開,兩邊可多剪去一點;將紙板模型平放在一塊厚2.5mm的鐵板上,鐵板具體厚度根據卡圈槽磨損的深淺來決定,用石筆畫出圖形;在砂輪機上磨掉毛刺,再把兩塊鐵板用力合在擋圈槽內,注意好不能有松動,后用電焊把兩邊焊上。也可在鐵板緊挨固定鏈輪螺帽的地方焊上,這樣更牢固可靠。

擋圈,包括擋圈基體,其特征在于:孔用擋圈基體外沿設有加厚層;擋圈基體上表面設有一內弧形面。制造工藝簡單,結構合理,擋圈彈性好,將原來的平面接觸改為了內弧面接觸,的降低了固定零件的使用應力,從而使固定牢靠,定位準確,而且通過加厚層的設計提高了其使用壽命,增加了工作效率。

Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts