The following are the relevant waveform washer parameters

location:Home / NEWS / The following are the relevant waveform washer parameters

The following are the relevant waveform washer parameters

date:[2015-03-22]     pk_hits:
在螺紋緊固件中因螺栓、螺釘、螺母的支承面不可能做得很大(受材料與工藝的限制),為減小承壓面的壓應力,保護被連接件的表面而采用波形墊圈。為防止連接副的松動采用防松的波形墊圈和多齒形鎖緊墊圈、圓螺母止動墊圈以及鞍形、波形、錐形波形墊圈。波形墊圈主要用于減小壓強,當有的部位擰緊軸向力很大時,易使墊圈壓成碟形,這時可改用材料和提高硬度來解決。對于用于高速擰緊(氣動或電動)的波形墊圈,好采用表面磷化處理的墊圈,提高其減磨性能,否則易摩擦發熱而燒壞或張口,甚至損壞被連接件表面。對于薄板連接處,不應采用波形墊圈結構。據統計,波形墊圈在汽車上使用得越來越少了。

下面是相關的波形墊圈參數:
波形墊圈
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts