Method for Surface Treatment of Waveform Washers

location:Home / NEWS / Method for Surface Treatment of Waveform Washers

Method for Surface Treatment of Waveform Washers

date:[2022-09-17]     pk_hits:
雷馳汽車零部件有限公司是標準件、緊固件類產品的專注制造商。下面雷馳要為大家介紹的是關于波形墊圈表面處理的方法:

波形墊圈表面需要要求進行氧化發黑處理,使得表面無殘缺、氧化生銹等不良現象。同時波形墊圈的波形分布也要均勻。波形墊圈由于其形狀特點形如波浪厚度薄且具有彈性因此上料及準確裝配到位有一定難度。因?yàn)椴ㄐ螇|圈由若干波峰波谷構成的薄片環狀彈性金屬元件選用彈簧鋼經特定方法熱處理并根據具體情況硬度一般控制在HRC44-55之間具有良好彈性。
從化學成分、顯微組織、斷口形貌、氫含量、硬度等方面對波形墊圈表面使用過程中連續出現早期斷裂的原因進行了分析。對同批零件進行了氫脆和回火脆性驗證試驗分析了除氫時間、氫含量、硬度以及回火溫度對斷口形貌的影響同時對不同硬度檢測方法對波形墊圈硬度值的影響進行了分析。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts